13.1. Implementation
WebUI
:
Rules
IP Rules: Click the IP rule item
General
Check Enable logging
Severity: Choose one of the severity levels from the dropdown list.
Log Receivers
Log to: Check either All receivers or Specific receiver(s)
(If Specific receiver(s) is checked, select the Syslog receiver(s) that has been
defined previously from Available list to Selected list.)
Then click OK.
Example:
The firewall's built-in memory log receiver can be enabled in a similar way
as explained in the Example: Enabling Syslog.
To check the log file contents stored by the memory log receiver, follow the
steps below:
WebUI
:
Menu Bar: Status
100 items of newly generated events can be displayed per page.
To see previous events, press next.
Enabling Memory Log
Logging:
D-Link Firewalls User's Guide
Log Settings:
105