Ping; Pipes - D-Link DFL-1600 User Manual

330
Debug parameters:
- spf, Performs full SPF calculation
- refresh, Refreshes all self originated LSAs in the process
- ifacemetric

Ping

Sends a specified number of ICMP Echo Request packets to a given
destination. All packets are sent in immediate succession rather than one
per second. This behavior is the best one suited for diagnosing connectivity
problems.
Syntax:
ping
[ size ]]
Options:
- r recvif , Run through the ruleset, simulating that the packet was
received by
- s srcip , Use this source IP.
- p table , Route using the specified PBR table.
- v, Verbose ping.
Example:
Cmd> ping 192.168.12.1
Sending 1 ping to 192.168.12.1 from 192.168.14.19 using PBR
table "main". Echo reply from 192.168.12.1 seq=0 time= 10 ms
TTL=255

Pipes

Shows the list of configured pipes; the contents of the Pipes configuration
section, along with basic throughput figures of each pipe.
Syntax: pipes [options]
Options:
- s Display overall statistics
Chapter A. Console Commands Reference
if metric , Changes the metric of a interface
IPAddr [options] [
recvif .
name
D-Link Firewalls User's Guide
of packets