328
Lockdown
Sets local lockdown on or off. During local lockdown, only traffic from
admin nets to the firewall itself is allowed. Everything else is dropped.
Note: If local lockdown has been set by the core itself due to licensing or
configuration problems, this command will NOT remove such a lock.
Syntax: lockdown [ on
Loghosts
Shows the list of log recipients the firewall is configured to send log data to.
Syntax: loghosts
Example:
Cmd> loghosts
Log hosts:
SysLog 192.168.123.10
Usage logging in 3600 second intervals
Memory
Displays core memory consumption. Also displays detailed memory use of
some components and lists.
Syntax: memory
Netcon
Shows a list of users currently connected to the firewall via the netcon
management protocol.
Syntax: netcon
Example:
Cmd> netcon
Currently connected NetCon users:
Iface IP address
lan
192.168.123.11 39495
Chapter A. Console Commands Reference
off ]
Facility: local0
port
D-Link Firewalls User's Guide