D-Link DFL-1600 User Manual page 113

10.7. Policy Based Routing(PBR)
We add rules for inbound as well as outbound connections.
Complete the following steps to configure this example scenario in the
firewall.
1. Add routes to main routing table.
Add the routes found in the list of routes in the main routing table, as
shown earlier.
See section 10.6 Creating a Static Route
to add routes.
2. Create PBR table.
See section 10.7.4 Creating a Policy-Based Routing Table
tion on how to create a PBR table. Name the table "r2" and make sure the
ordering is set to "Default".
3. Add default route to PBR table.
Add the route found in the list of routes in the named policy routing table
"r2", as shown earlier.
See section 10.7.4 Creating a Policy-Based Route
tion on how to add routes to a PBR table.
4. Add PBR policies.
We need to add two PBR policies according to the list of policies shown
earlier.
Routing Policy-based Routing Policy
based Routing Rule:
Enter the information found in the list of policies displayed earlier.
Repeat this step to add the second rule.
Note
D-Link Firewalls User's Guide
for more information on how
for more informa-
for more informa-
Add
93
Policy-