xStack DES-3526 / DES-3526DC Layer 2 Stackable Fast Ethernet Managed Switch User Manual
NOTICE: Any changes made to the Switch configuration during the current session must be saved
in the Save Changes web menu (explained below) or use the command line interface (CLI)
command save.
Web Pages
When you connect to the management mode of the Switch with a web browser, a login window is displayed. Enter a user name
and password to access the Switch's management mode.
Below is a list and description of the main folders available in the web interface:
Configurations – Contains windows concerning configurations for IP Address, Switch Information, Advanced Settings, Port
Configuration, IGMP, Spanning Tree, Forwarding Filtering, VLANs, Port Bandwidth, SNTP Settings, Port Security, QoS, MAC
Notification, LACP, Access Profile Table, System Log Servers, PAE Access Entity, and Layer 3 IP Networking.
Security Management – Contains windows concerning configurations for Security IP, User Accounts, Access Authentication
Control (TACACS), Secure Sockets Layer (SSL), Secure Shell (SSH), and SNMP V3.
Monitoring – Contains windows concerning monitoring the Switch, pertaining to Port Utilization, CPU Utilization, Packets,
Errors Size, MAC Address, IGMP Snooping Group, IGMP Snooping Forwarding, VLAN Status, Router Port, Port Access Control
and Layer 3 Feature.
Maintenance – Contains windows concerning configurations and information about Switch maintenance, including TFTP
Services, Switch History, Ping Test, Save Changes, Reboot Services, and Logout.
Single IP Management – Contains windows concerning information on Single IP Management, including SIM Settings,
Topology, and Firmware/Configuration downloads.
NOTE: Be sure to configure the user name and password in the User Accounts menu
before connecting the Switch to the greater network.
21