D-Link DES-3526 User Manual page 95

xStack DES-3526 / DES-3526DC Layer 2 Stackable Fast Ethernet Managed Switch User Manual
In the Configuration folder, click the Access Profile Table link opening the Access Profile Table window. Under the heading
Access Rule, clicking Modify, will open the following window.
The user may search for the settings of a particular Access ID by entering that ID into the Access ID field above and clicking
Find. The user may display all Access ID entries by clicking the View All Entry button.
To create a new rule set for an access profile click the Add button. A new window is displayed. To remove a previously created
rule, click the corresponding X button.
Configure the following Access Rule Configuration settings:
Parameter
Profile ID
Mode
Access ID (1-65535)
Figure 6- 60. Access Rule Table window
Figure 6- 61. Access Rule Configuration window (IP)
Description
This is the identifier number for this profile set.
Select Permit to specify that the Switch, according to any additional rule, forward the packets
that match the access profile added (see below).
Select Deny to specify that packets that do not match the access profile are not forwarded by
the Switch and will be filtered.
Type in a unique identifier number for this access or use Auto Assign.
82