Section - Configuration
Configuration
This section will show you how to configure your new D-Link Internet Camera using the Installation Wizard.
Setup Wizard Configuration
Click on the D-Link Installation Wizard icon that was created in your Windows Start menu.
The Setup Wizard will appear and show the MAC address of the DCS-5610 and an IP Address (which may or may not
be correct depending on what you have your DCS-5610 connected to). If you have a DHCP server on your network,
there will be a valid IP Address displayed here.
Note: A DHCP server is a device that supplies the same IP address.
Click Manual Setup
D-Link DCS-5610 User Manual
15