D-Link DCS-5610 User Manual page 34

Ptz poe internet camera
Hide thumbs Also See for DCS-5610:
Table of Contents

Advertisement

Section  - Configuration
RTSP port:
The port number that you use for RSTP streaming, the default port number is 554. RTP (Real Time Protocol) Port is used
to streaming audio and video while RTCP (Real Time Control Protocol) port is used to monitor QoS of RTP stream.
Note: RTP video port and RTP audio port must be an "even" number. The numbers of RTCP video port and RTCP audio
port must equal to the numbers of RTP video port and RTP audio port, plus one repetitively
RTP port for video:
Default port number is 5556.
RTCP port for video:
Default port number is 5557.
RTP port for audio:
Default port number is 5558.
RTCP port for audio:
Default port number is 5559.
You may choose to enable multicast for your camera audio and video streaming so that your cameras (sources) and the
receivers (clients) can establish the connection to send and receive contents.
Multicast group
An IP Multicast group address is used to send and receive content. Sources use this group address as the destination
address:
address while sending their data packets. Receivers use this group address to inform the network that they are interested
in receiving packets sent to that group.
For example, if some content is associated with group 239.1.1.1, the source will send data packets destined to 239.1.1.1.
Receivers for that content will inform the network that they are interested in receiving data packets sent to the group
239.1.1.1. The receiver "joins" 239.1.1.1. The Multicast address ranges from 224.0.0.0 to 239.255.255.255, or, equivalently,
224.0.0.0/4
Multicast video port:
Default port number is 5560, or please choose between 1024 and 65534.
Multicast RTCP video
Default port number is 5561, or please choose between 1024 and 65534.
port:
Multicast audio port:
Default port number is 5562, or please choose between 1024 and 65534.
Multicast RTCP audio
Default port number is 5563, or please choose between 1024 and 65534.
port:
Multicast TTL
Set a Time to Live(TTL) value for multicast packet, please choose between 1 and 255.
{1~255]:
D-Link DCS-5610 User Manual


Advertisement

Table of Contents
loading

Table of Contents