Section 3 - Configuration
Using the Configuration Menu
After completing the Camera Installation Wizard, you are ready to use your camera. The camera's built-in Web configuration utility is
designed to allow you to easily access and configure your DCS-930. At the end of the wizard, click Go To Camera, or enter the IP address
. To log in, use the User name admin and the password you created in the
of your camera into a web browser, such as Internet Explorer
Installation Wizard. If you did not create a password, the default password is blank. After entering your password, click OK.
Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the default IP is 192.168.0.20.
D-Link DCS-930 User Manual