Enabling Upnp For Windows ® Xp - D-Link SECURICAM Network DCS-2120 User Manual

Section  - Configuration
Enabling UPnP for Windows XP
®
UPnP (Universal Plug and Play) is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. The
DCS-2120 is an UPnP enabled Internet camera. If your operating system is UPnP
enabled, the device will be easier to configure. If you do not want to use the UPnP
functionality, it can be disabled by unchecking the Enabled UPnP checkbox in
the Advanced > Network page (see page 33). Use the following steps to enable
UPnP settings only if you are running Windows XP. If you are running Windows
® ®
98/2000, UPnP is not available.
Go to Start > Settings. Click Control Panel.
Click Add or Remove Programs
D-Link DCS-10 User Manual