D-Link SECURICAM Network DCS-2120 User Manual page 44

Section  - Configuration
Click the Motion Detection button from the Configuration screen to enable the motion detection function of the
DCS-2120 Internet Camera.
Enable motion detection:
New:
Save:
Window Name:
Sensitivity:
Percentage:
D-Link DCS-10 User Manual
Check this option to turn on the motion
detection.
Adds new windows that monitor specific
area of the image window. Up to 3
motion detection windows can be
added.
Saves the new windows settings.
The name of the motion detection
window.
Adjusting the sensitivity allows you to
set the "amount of motion" required to
trigger motion detection. If you want
to detect most or all movement, use
a high sensitivity. If you want to ignore
smaller amounts of movement, use a
low sensitivity.
Adjusting the percentage allows you to set a requirement on how much of the motion window
must be filled by movement. Example: If you set this to 50%, then the selected window must be
half filled by a moving object before it triggers motion detection.
Motion Detection