D-Link SECURICAM Network DCS-2120 User Manual page 37

Section  - Configuration
1st FTP server:
1st FTP server port:
1st FTP user name:
1st FTP password:
1st FTP remote folder:
2nd FTP server:
2nd FTP server port:
2nd FTP user name:
2nd FTP password:
2nd FTP remote Folder:
Invalid settings may cause the DCS-2120 to not respond. Change the configuration settings only if necessary. Consult
with your network administrator or your Internet Service Provider (ISP) if you do not have the necessary information.
If you cannot connect to the camera, refer to page 7 for camera reset and restore factory settings procedures.
D-Link DCS-10 User Manual
The host name of the FTP server.
The port of the FTP server. Usually the port number of FTP server is 21. It depends on the FTP server's
setup.
The account name to access the FTP server.
The password that was setup with the account to access the FTP server.
The directory that the images will be uploaded into (For example, \pub\images).
The 2nd FTP server serves as a backup FTP server.
The port of the FTP server. Usually the port number of FTP server is 21. It depends on the FTP server's
setup.
The account name to access the FTP server.
The password that was setup with the account to access the FTP server.
The directory that the images will be uploaded into (For example, \pub\images).
Note: The second FTP setting only activates when the first FTP setting is failed.