Hardware Overview - D-Link SECURICAM Network DCS-2120 User Manual

Section 1 - Product Overview
Antenna Connector
One antenna is included with the DCS-2120.
It is fastened onto the antenna connector on
the side panel to provide a connection with
a wireless network.
DC Power Connector
The DC Power input connector is labeled DC
5V with a single jack socket to supply power
to the DCS-2120.
Ethernet Cable Connector
The DCS-2120 features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX
Fast Ethernet cabling. The port supports the NWay protocol, allowing the DCS-2120 to automatically detect or
negotiate the transmission speed of the network.
Reset Button
Reset will be initiated when the reset button is pressed once and Power
LED begins to flash. Factory Reset will be initiated when the reset button
is pressed continuously for 30 seconds. Release the reset button and the
Power LED will begin to flash indicating that the DCS-2120's settings are
restored back to the factory settings.
D-Link DCS-10 User Manual

Hardware Overview