Using & Configuring The Dcs-2120 With A Nat Router - D-Link SECURICAM Network DCS-2120 User Manual

Section  - Security
Using & Configuring the DCS-2120 with a NAT Router
D-Link's DCS-2120 is a versatile and cost effective Internet Camera offering both video and audio monitoring. It can
also serve as a powerful surveillance system in security applications. The DCS-2120 can be used with any wired or
802.11g wireless router. This section explains how to view the camera from either the Internet or from inside your
internal network.
Materials Needed:
• 1 DCS-2120 Internet Camera
• 1 Ethernet Cable
• A Wired or Wireless router such as the D-Link DI-624 Wireless Router
• Ethernet based PC for system configuration
SETTING UP THE DCS-2120 FOR USE BEHIND A ROUTER
Installing a DCS-2120 Internet Camera on your network is an easy 4–step procedure:
1 Assign a Local IP Address to Your Internet Camera
2 View the Internet Camera Using Your Internet Explorer Web Browser
3 Access the Router with Your Web Browser
4 Open Virtual Server Ports to Enable Remote Image Viewing
This section is designed to walk you through the setup process for installing your camera behind a router and enable
remote video viewing. For the basic setup of the DCS-2120, follow the steps outlined in the Quick Installation Guide.
D-Link DCS-10 User Manual 11