D-Link SECURICAM Network DCS-2120 User Manual page 50

Section  - Configuration
Email:
FTP:
FTP put snapshots with date
and time suffix:
Click on the Maintenance button to access the option to restore to factory default settings.
Reboot system:
Factory default:
Update firmware:
Click Apply on this screen to restore factory default settings. After confirmation, the system will restart and require the
Installation Wizard program to locate the IP address of the DCS-2120.
D-Link DCS-10 User Manual
This option enables the camera to send snapshot via e-mail.
This enables the camera to send snapshot to a FTP server.
This option will add a date and time indicator to the image file name. For instance, "video@20020102030405.jpg"
indicates the JPEG image was captured at Year: 2002; Month: January; Date: 2nd; Time: 03:04:05 AM.
This option will restart the camera.
This option will reset the camera back to
factory default settings. This will remove
all the configuration settings that were
made previously.
This option allows the user to upgrade
the firmware via the Browser. Click on
"Browse" to locate the firmware file and
then click on "Upgrade" to apply the
firmware to the camera.
Maintenance
0