Enabling Upnp Tm For Windows ® Xp - D-Link DCS-6620 User Manual

DCS-6620 User's Manual
Enabling UPnP for Windows
UPnP is short for Universal Plug and Play, which is a networking architecture that provides
TM
compatibility among networking equipment, software, and peripherals.The DCS-6620 is a UPnP
enabled PTZ Internet Camera. If your operating system is UPnP enabled, the device will be
easier to configure. If you do not want to use the UPnP functionality, it can be disabled by
unselecting "Enabled" on the DDNS/UPnP settings page under "Advanced" in the configuration
menu. Use the following steps to enable UPnP (Universal Plug and Play) settings only if you
are running Windows XP. If you are running Windows 2000, UPnP is not available.
Go to Start >Settings.

D-Link Systems, Inc.
TM
Control Panel
Click
Add or Remove
Click
Programs
Enabling UPnP for Windows
TM
XP
®
XP
®
18