D-Link SECURICAM Network DCS-2120 User Manual page 118

Section  - Security
After you have completed the setup of the DCS-2120 outlined in the Quick Installation Guide you will have an operating
camera that has an assigned IP Address. Because you are using a router to share the Internet with one or more PCs,
the IP Address assigned to the Internet Camera will be a local IP Address. This allows viewing within your Local Area
Network (LAN) until the router is configured to allow remote viewing of the camera over the Internet.
1 Assign a Local IP Address to Your Camera
Run the Installation Wizard program from the CD included with the DCS-2120. Follow the steps in the Quick Installation
Guide to configure the DCS-2120. The camera will be assigned a local IP Address that allows it to be recognized by
the router. Write down this IP Address for future reference.
This is the IP Address assigned to your camera. Write it down for later use. 192.168.0.120 is only an example. You will
probably have a different IP Address.
D-Link DCS-10 User Manual 11