D-Link DSA-3100 Manual page 44

Using the Configuration Utility (continued)
Advanced > Firewall (continued)
Filter
Name
Check to en-
able this rule
Action
Protocol
Source MAC
Source/
Destination IF
Source/
Destination IP
Address
Source/Destina-
tion Subnet Mask
Source/Destination
Operator
Source/Desti-
nation Start Port
Source/Destina-
tion End Port
Description
Gives a name to the IP Filter rule
Enables this rule if it is marked
Specifies the action to be taken when packets match the rule
Block: Packets matching the rule will be dropped
Pass: Packets matching the rule will be passed
Specifies the protocol(s) this filter rule will apply to
Source MAC address (optional)
Source/Destination Interface (IF). You can select WAN port
or LAN port or Authentication port or ALL ports
Source/Destination IP Address
Source/Destination Subnet Mask
Select =(equal), != (not equal),>(greater than), <(smaller than)
operator rule
Source/Destination Start Port
Source/Destination End Port
42