D-Link DSA-3100 Manual page 21

Using the Configuration Utility (continued)
Home > Public Network (continued)
Enable
DHCP
Selecting this option activates the device's built-in DHCP server. Configure
Server:
the DHCP server with the following properties:
DHCP Scope
Start IP
Address:
DHCP Scope
End IP
Address:
Lease Time:
Domain
Name:
WINS
Server:
Primary DNS
Server:
Secondary
DNS
Server:
Enable
DHCP
Select this mode to specify another DHCP server's IP address.
Relay:
Enter the starting IP address, from which the DHCP
server will assign to the DHCP-enabled devices
(clients) on the network.
Enter the last IP address in the sequence of addresses from
which the DHCP server will assign to clients on the network.
Select the length of time during which the DHCP assigned
address will be in effect.
Enter the domain name.
Enter the WINS server's IP address, if one is present on the
network.
Enter the IP address of the preferred DNS server.
Enter the IP address of the alternate DNS server.
21