D-Link DSA-3100 Manual page 18

Using the Configuration Utility (continued)
Home > WAN > Static IP Address
Static IP
Address: IP address:
Subnet
mask:
Default
Gateway:
Dynamic IP
Make this selection if there is a DHCP server in the network.
(See the following pages.)
Address:
PPPoE
Make this selection if you connect to the Internet using DSL.
Client:
(See the following pages.)
Enter the IP address provided to you by your ISP.
Enter the subnet mask provided to you by your ISP. All
devices on the network must have the same netmask.
Enter the IP address of the gateway, provided to you
by your ISP.
18