D-Link DSA-3100 Manual page 29

Using the Configuration Utility (continued)
Home > User Manager > Authentication Server > Local > Local Users
List
Upload User Accounts:
Caution: When adding user accounts by uploading a file, existing
accounts with the same ID will be replaced by the new ones.
Besides adding user accounts one by one through the Web
interface, you can prepare a text file, which contains user account
information, store it on your hard drive and then upload it to the
DSA-3100.
Each line of the text file can be in one of the following two formats:
Please note that there must be no space or other characters
between the user ID, password, the MAC address and the group
number. The MAC address could be omitted, but the trailing
comma must be retained. A user ID should be between 1 to 32
characters and the password should be between 0 to 20
characters. Special characters are not allowed for user name
and password.
After you have created the text file for the user account as
described above, click Upload User Accounts as shown in the
illustration at the top of this page. Click Browse and highlight the
text file you have created.
Click Refresh for the latest information. Click Apply to update
your changes.
29