Advertisement
Quick Links
Programming by using an already programmed remote:
1. Loosen the 2 screws on the back of
KEYGO.
2. Open the back.
3. This manipulation can be carried out with the RTS radio remote controls, like:
TELIS 1 RTS
TELIS 4 RTS
4. Take the remote control which is already registered on your blinds.
5. Press the button PROG, which is located on the back of the remote for 3
seconds.
Your roller shutter performs a back and forth movement.
Programming Manual
SOMFY KEYGO T4 PRO
CONTROLIS RTS
http://www.remotecontrol-express.com
SMOOVE RTS
Advertisement
Related Manuals for SOMFY KEYGO T4 PRO
Summary of Contents for SOMFY KEYGO T4 PRO
- Page 1 Programming Manual SOMFY KEYGO T4 PRO Programming by using an already programmed remote: 1. Loosen the 2 screws on the back of KEYGO. 2. Open the back. 3. This manipulation can be carried out with the RTS radio remote controls, like: ...
- Page 2 Programming Manual 6. Press the PROG button of the KeyGo 7. While the LED is on, press the button you want to program. Your roller shutter performs AGAIN a back and forth movement. 8. Press the same button again. ...
- Page 3 Programming Manual Fig 2 1. Open the cover of the receiver. It is located on or next to your engine. 2. Press on the receiver one of the arrows as often until F0 will be displayed on the digital display. 3.
Need help?
Do you have a question about the KEYGO T4 PRO and is the answer not in the manual?
Questions and answers