Danfoss DSA 2 MAXI Installation Manual page 21

Installation Guide


Max temperature limitation
(temperature limiting thermo-
static function).

Danfoss District Energy
DSA 2 MAXI Substation

Pump alarm. The alarm disap-
pears from the display when the
pump is working again.

Max temperature limitation can
be used e.g. in floor-heating
system as a temperature limiting
thermostatic function.

In a floor-heating system the
maximum temperature limita-
tion can be set at 50°C.
 Pressure alarm.
Alarm value:
1=open contact (eg. Wilo)
0= closing contact (e.g. Grund-
fos)

Getting out of the menu.

VI.GE.K3.02
Max and min limitations (Alarm
high, Alarm low) have to
adapted to the building.
Low X and high X values have
been set based on the pressure
transmitter included. Do not
change!


DEN-SMT/PL 21 21