Manual Control - Danfoss DSA 2 MAXI Installation Manual

Installation Guide
Typical flow temperature max.
limitation: When taking floor-
heating system into use for the
first time (drying up concrete
slab) 27°C.



5.9.6 Manual control

Manual control is typically used when installing or servicing. The
controlled components, valve, pump etc. can be controlled for
correct function.

18 DEN-SMT/PL
DSA 2 MAXI Substation
Example display of the heat
curve limiting temperature:
floor-heating heat curve, flow
temp. max limitation 27°C.

The heat curve display by fol-
lowing the intructions in "5.9.4
Setting the heat curve".

Typical flow temperature min.
limitation is 20°C.

Getting out of the menu.

 Getting out of the menu.
Do not leave the controller in "Manual control" mode after
finishing maintenance or service work. The normal mode is
"Comfort mode"
operation" .

VI.GE.K3.02
or when using schedules "Scheduled
 The valve is open.
Danfoss District Energy