Loading The Battery; Charging The Battery; Charging By Ac-Adapter; Charging By Pc / Notebook - CONCORD DVX User Manual

Concord camera dvx: user guide

Hide thumbs Also See for DVX:

Table of Contents

LOADING THE BATTERY

The camera uses a 3.7 volts rechargeable Li-ion Battery.

1. Press the Battery Door Latch that is located at the upper side of the unit to open the back cover.

2. Slide the battery into the battery compartment and align with the metal contact.

3. Replace the back cover.

1. Plug the AC end of the adaptor into a standard AC socket.

2. Plug the USB end of the adaptor into the USB port of the camera. The red backlight will be turned on.

• Charging the battery for the first time will takes about 6 hours. When the battery is fully charged, the red

backlight will go off.

• Charging the battery fully for the second time or later

will take at least 2 hours.

• When charging the battery for the first time, it is

recommended to use AC adaptor instead of USB

cable.

You can also use the USB cable to charge the battery.

1. Connect the bigger end of the USB cable to the USB port of your

PC or Notebook.

2. Plug the smaller end of the USB cable to the USB port of the

camera.

• The red backlight will turn on when the battery is being charged

and it will turn off when the unit is fully charged. The time for

fully charging is about 4-6 hours.

The camera uses SD or MMC card as storage. Insert an SD or MMC card according to the illustrations below

before proceeding to take video clips or pictures.

To remove the memory card, gently push the edge of the memory card with your fingertip to eject it first, and

then pull the card out.

AC end

GETTING STARTED

USB end

Table of Contents