Table of Contents
Advertisement
Turning Date Stamp On or Off
By default, the Date Stamp is set at OFF mode. If you want to have date printed on the images (on the bottom
left corner), follows the steps below to turn on the Date Stamp.
1. Press the MENU button to enter Menu screen.
2. Press the
button to highlight Advanced.
3. Press the
or
button to highlight the Date Stamp.
4. Press the
button or SET button to enter its submenu.
5. Press the
or
button to select ON.
6. Press the SET to save the setting.
7. Press the MENU to exit Menu screen.
Note: When you do not want to print date on the picture anymore, repeat steps above but to choose OFF.
REVIEWING THE PICTURES IN DSC MODE
1. Press the SET button to enter Review mode. The last shot image will be shown on the LCD.
2. Press the
or
button to skip to the previous or next image.
3. Press the Shutter button or the
USING THE REVIEW MENU IN DSC MODE
Deleting One Picture File
The steps are similar to that in DV mode. Please refer to p.10.
Deleting All Picture Files
The steps are similar to that in DV mode. Please refer to p.10.
Rotating Pictures
Pictures stored in the memory can be rotated by 0°, 90°, 180°, and 270°. The rotated picture will be automatically
saved as a new picture and will not replace the original one.
1. In DSC mode, press the SET button to enter Review mode.
2. Press the
or
button to find out the picture to be rotated.
3. Press the MENU button to enter Menu screen.
4. Press the
or
button to highlight Rotate.
5. Press the
button or SET button to enter its submenu. A small window will be shown on the LCD.
6. Press the
or
button to select 0°, 90° clockwise, 180° or 90° anti-clockwise.
7. Press the SET to confirm.
8. Press the MENU button to exit Menu screen. The rotated picture will be shown on the LCD.
9. Press the
button or SET button to exit Review mode.
button to return shooting mode.
15
DIGITAL STILL CAMERA (DSC)
Advertisement
Table of Contents
