Setting Tv Signal Output Type; Setting Environmental Light Frequency; Setting Language - CONCORD DVX User Manual

CUSTOMIZING THE CAMERA SETTINGS (SET UP)

SETTING TV SIGNAL OUTPUT TYPE

The camera allows you to view the recorded pictures or video clips on the television. To begin, set the TV signal
output type to suit your TV setting. The camera's default value is NTSC.
1. In the Set Up mode, press the
2. Press the button or SET button to enter its submenu.
3. Press the or
4. Press the SET to save the setting. Or press the
be changed.

SETTING ENVIRONMENTAL LIGHT FREQUENCY

While taking pictures or recording video clips under indoor florescent lighting, the flicker of the light source will
decrease the image quality. To overcome this phenomenon, you can change the light frequency setting to suit
the light source. By default, the light frequency is 60 Hz.
1. In the Set Up mode, press the
2. Press the button or SET button to enter its submenu.
3. Press the or button to select date format: 50Hz or 60Hz.
4. Press the SET to save the setting. Or press the
will not be changed.
Note: The flicker caused by direct shooting against light source cannot be eliminated.

SETTING LANGUAGE

1. In the Set Up mode, press the
2. Press the button or SET button to enter its submenu.
3. Press the or button to select the desired language.
4. Press the SET to save the setting. Or press the
will not be changed.
or button to highlight the TV type.
button to select date format: NTSC or PAL.
or button to highlight the Flicker Fre.
or button to highlight the Language.
button to exit the submenu. If so, the TV setting will not
button to exit the submenu. If so, the frequency setting
button to exit the submenu. If so, the language setting
24