Power Supply; Loading The Alkaline Or Rechargeable Batteries - CONCORD 4330z Owner's Manual

Power supply

This is how it works:
Loading alkaline or
rechargeable batteries
Your camera uses four size
AA alkaline batteries or four
NiMH batteries or four
rechargeable batteries, type
NiCd.
Should you use rechargeable
batteries, make sure that
these have been fully
charged in a suitable
charger.
Always turn the camera off
before loading or exchang-
ing batteries.
Open the battery compart-
ment by pushing its cover in
the direction shown (1), then
open the flap (2).
Load the batteries in
accordance with the +/-
marks.
18
This is how it looks: This is what it's for: :
The camera should prefer-
ably be used with high-
capacity NiMH batteries.
After changing batteries,
check whether the built-in
clock is set to the correct
date and time.
If the camera is without
power supply for over five
minutes, the clock may be
slow or it may reset. In this
case, set date and time.
Left without power supply
for a prolonged period, the
camera will "forget"
individual settings and reset
to default values.
However, the pictures stored
on your memory card will
not be lost.
Do not put the camera
down with the battery
compartment open to
prevent damage to its cover.
Be careful when changing the
batteries as they may be hot.