Playback Via Tv Set Or Video Beamer - CONCORD 4330z Owner's Manual

Image playback
You may view the
pictures captured with
your camera on a TV
screen. The camera has
a video output ter-
minal via which it can
be connected to a TV
set using the video
cable. This terminal
can be switched to
either NTSC or PAL.
50
This is how it works:
Playback via TV set or
video beamer
The pictures saved on your
memory card can be viewed
on a TV set or projected via
a video beamer.
To do this, connect the cable
supplied to the Video Out
terminal under the lateral
rubber cover of your camera
to the Video In terminal of
your TV set or beamer.
Caution: Be sure to make
the connection with both
the camera and the TV set or
beamer switched off!
Then switch on the
TV/beamer and the camera
set to Playback. The camera
screen is disabled in this
mode.
You may use any of the
playback modes of the
camera: single frames, zoom
magnifier and, above all,
slide show.
Mode dial set to Playback icon
This is what it's for:
Dark TV screen? Check
whether the right video
input of your TV set is
activated. Many TV sets
have several video inputs.
Connecting your digital
camera to a TV set is a neat
way of viewing your pictures
quickly and hassle-free on a
large screen or showing
them to your friends.
You may have to turn up the
color of your TV set and
reduce brightness some-
what, since digital images
are optimized for viewing on
PC monitors. However, your
pictures are saved in true
color on your memory card.
If you have more than one
CF card, you may assemble
your own selection of
images on one card (via your
PC).