Tv Mode - CONCORD DUO User Manual

TV mode

The Concord Eye-Q™ Duo camera allows you to view individual
photos on the television. To begin, check your television
documentation to determine what video standard you should set
your camera to, either NTSC or PAL®.
Hint: In North America, the TV standard is NTSC.
Connecting to the television:
1. Connect the AV cable supplied with your
camera into the jack marked VIDEO or
VIDEO IN on your television.
2. Turn on your television.
3. Set the television to video mode according
to the instructions in the owner's manual,
usually channel 3 or 4.
4. Turn the camera on by pressing the POWER
button.
5. Press the Menu button once to activate the Feature mode. You
will see FEA in the upper right hand corner of the Status LCD.
6. Continue to press the Menu button until you see either the NTSC
or PAL icons.
7. Use the Select button to scroll between these two options.
8. Wait 5 seconds for the camera to return to normal picture taking
mode.
9. Connect the other end of the cable into the VIDEO port located
underneath the cable connection panel.
10. The Main Menu appears on the television screen.
11. Use the Menu button on the back of the camera to scroll through
the Main Menu on the television screen. Use the Shutter button
to confirm your selection.
22