Dscp To Queue - Cisco SRP521W Administration Manual

Configuring the Network
QoS
STEP 1
STEP 2
STEP 3
Services Ready Platform SRP 500 Series Administration Guide
Field
VLAN CoS
Priority

DSCP To Queue

The DSCP to Queue Page enables mapping DSCP (IP DiffServ) values to specific
queues.
Click Network Setup on the tab and then click QOS in the navigation pane. Click
DSCP To Queue. The DSCP To Queue page appears.
Change the priority settings for each IP DiffServ value as necessary.
Click Submit to save your settings.
Description
Specifies the VLAN (CoS) priority tag values, where
zero is the lowest and 7 is the highest.
Defines the traffic forwarding queue to which the CoS
priority is mapped. Four traffic priority queues are
supported.
5
90