Traceroute Test - Cisco SRP521W Administration Manual

9

Traceroute Test

STEP 1
STEP 2
STEP 3
149
Field
IP or URL Address
Packet Size
Times to Ping
Start to Ping
You can perform a traceroute test from the configuration utility.
Click Diagnostics on the tab and then click Traceroute Test in the navigation pane.
The Traceroute Test page appears.
Enter an IP or URL address.
Click Start to Traceroute to start the test.
Using Services Ready Platform Diagnostics
Description
The IP address or URL that you want to ping.
The size of the packet you want to use. The range is 32
to 65500 bytes.
Select the number of times you wish to ping: 5, 10, or
Unlimited.
Click this button to begin the test. A new page appears
and displays the test results.
Services Ready Platform SRP 500 Series Administration Guide
Traceroute Test