Failover And Recovery (Srp 526W, Srp 527W) - Cisco SRP521W Administration Manual

Cisco srp521w: user guide
Hide thumbs Also See for SRP521W:
Table of Contents

Advertisement

4
53
Field
Interface
Connection Failover
Timeout
Connection
Validation Site
WAN Interfaces

Failover and Recovery (SRP 526W, SRP 527W)

An Internet connection can be established via the DSL port or a 3G wireless
modem plugged into the USB port. Refer to
details on compatible 3G USB modem devices.
While both DSL and 3G USB modem may be connected, only one of them can be
used to establish a link at a time. Whenever the Internet connection fails, the
Services Ready Platform automatically attempts to bring up another connection
on another interface. This feature is called
connection recovers, the Services Ready Platform automatically attempts to bring
back and recover the Internet connection. This feature is called
Setting up the Interfaces of the Services Ready Platform
Description
Failover detection works by detecting the physical
connection and/or presence of traffic on the Internet
link. If the link is idle, the Services Ready Platform
attempts to ping a destination. If the ping does not reply,
the Services Ready Platform assumes the link is down
and attempts to fail over to another interface.
The time interval at which the Services Ready Platform
detects the status of the Internet connection. The default
timeout interval is 60 seconds.
A ping target for the Services Ready Platform to use to
detect the status of the Internet connection. By default
the Services Ready Platform pings the Network Time
Protocol (NTP) servers. You may specify a different IP
address as a target here.
This area provides information on current status of the
Ethernet Internet connection and Mobile Network
connection. You can click the Status hyperlink to view
the details. You may also configure the interface priority
by clicking Up or Down. Note that the interface priority
setting is configurable only when Ethernet Connection
Recovery is disabled.
Failover
Services Ready Platform SRP 500 Series Administration Guide
Setting up the WAN Interface
www.cisco.com/go/srp500
. Whenever the DSL Internet
Recovery
for more
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srp 526w

Table of Contents