Port Range Triggering - Cisco SRP521W Administration Manual

Configuring the Network
NAT
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
Services Ready Platform SRP 500 Series Administration Guide
Field
IP Address
Enabled

Port Range Triggering

The settings for Port Range Triggering are set on this page. It instructs the Router
to watch outgoing data for specific port numbers. The IP address of the computer
that sends the matching data is remembered by the Router, so that when the
requested data returns through the Router, the data is sent to the proper computer
by way of IP address and port mapping rules.
This page shows the current port range triggering list and details of the selected
port range.
Click Network Setup on the tab and then click NAT in the navigation pane. Click
Port Range Triggering. The Port Range Triggering page appears.
Click Add Entry. The Port Range Triggering page opens.
Enter a name of the application.
Select a WAN interface.
Select a LAN interface
Enter a triggered port range.
Enter a forwarded port range.
Click Enabled to enable the applications you have defined.
Click Submit to save your settings.
Description
The IP address of the server that should receive the
requests.
Click Enabled to enable the applications you have
defined. This is disabled (unchecked) by default.
5
84