Accessories; View Accessories List; View Accessory Details; Set Up Wideband For Analog Headset - Cisco 9971 Standard User Manual

Accessories

You can connect external hardware to your phone using either the headjack, Bluetooth, or USB. The
accessory list, by default, contains an analog headset that can be set up to enable wideband.

View Accessories List

1. Press the Applications button
2. Select Accessories. (Use the Navigation pad and Select button to scroll and select.)
A list of phone accessories is displayed.
3. Press the Exit softkey to return to the Applications screen.

View Accessory Details

1. Press the Applications button
2. Select Accessories. (Use the Navigation pad and Select button to scroll and select.)
A list of phone accessories is displayed.
3. Select an accessory from list and press the Details softkey.
The phone screen displays the details of selected accessory. The information displayed on the
phone screen depends on the accessory selected. Most of the accessories provide these details:
Device Name
–
Hostname
–
Device Type
–
Device Service
–
Firmware Version
–
Paired Status (for Bluetooth devices)
–
Connected Status
–
Configured Status
–
4. Press the Setup softkey to configure the selected accessory for your phone.
5. Press the Exit softkey to return to the Applications screen.

Set Up Wideband for Analog Headset

1. Press the Applications button
2. Select Accessories. (Use the Navigation pad and Select button to scroll and select.)
A list of phone accessories is displayed.
54
.
.
.
OL-20616-01