Handset Rest - Cisco 9971 Standard User Manual

Handset Rest

Your system administrator may have mounted your phone on a wall. With a wall-mounted phone, you
may need to adjust the handset rest to ensure that the receiver does not slip out of the cradle.
1
Remove the handset from the cradle and pull the plastic tab from the handset rest.
1
Rotate the tab 180 degrees.
2
Hold the tab between two fingers, with the corner notches facing you.
3
Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension
4
protrudes from the top of the rotated tab. Return the handset to the handset rest.
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 8.0 (SIP)
2 3
Your Phone
4
47