Installing the Switch
1
2
3
Mounting the Switch in a Rack
After the brackets are attached to the switch, use the supplied Phillips machine screws to attach the
brackets to the rack
left or right bracket.
When you complete the switch installation, see the
for more information switch configuration.
Catalyst 3750-X and 3560-X Switch Hardware Installation Guide
2-18
Front-mounting position
Number-8 Phillips flat-head screws
Mid-mounting position
(Figure
2-19). Use the black Phillips machine screw to attach the cable guide to the
Chapter 2
4
Rear-mounting position
5
Four-point mounting positions
"After Installing the Switch" section on page 2-21
Switch Installation
OL-19593-01