Cisco Catalyst 3560X-24T Hardware Installation Manual page 47

Chapter 2 Switch Installation
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
Warning
precautions to ensure that the system remains stable. The following guidelines are provided to
ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest
component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in
the rack.
Installing the switch in other rack types requires an optional bracket kit not included with the switch.
Figure 2-17
OL-19593-01
Statement 1006
shows the standard 19-inch brackets and optional mounting brackets and part numbers.
Catalyst 3750-X and 3560-X Switch Hardware Installation Guide
Installing the Switch
2-15