Cisco Linksys RVL200 User Manual page 60

Chapter 4
4. Select the service you want from the Service pull-down
menu.
Click Next to continue. Click Prevous if you want to
return to the previous screen. Click Ext if you want to
exit the Setup Wizard.
Select the Service
5. For this service, you can select whether or not you want
the Router to keep a log tracking this type of activity.
To keep a log, select Log packets match ths access
rule. If you do not want a log, select Not log.
Click Next to continue. Click Prevous if you want to
return to the previous screen. Click Ext if you want to
exit the Setup Wizard.
Select the Log
4-Port SSL/IPSec VPN Router
Advanced Configuration
Select the appropriate Source Interface: LAN, WAN, or
6.
Any from the Interface pull-down menu.
Select the Source IP address(es) for this Access Rule. If it
can be any IP address, select Any. If it is one IP address,
select Sngle and enter the IP address in the Source IP
fields. If it is a range of IP addresses, select Range, and
enter the IP addresses in the Source IP fields.
Click Next to continue. Click Prevous if you want to
return to the previous screen. Click Ext if you want to
exit the Setup Wizard.
Select the Source
7. Select the Destination IP address(es) for this Access
Rule. If it can be any IP address, select Any. If it is one IP
address, select Sngle and enter the IP address in the
Destination IP fields. If it is a range of IP addresses, select
Range, and enter the IP addresses in the Destination IP
fields.
Click Next to continue. Click Prevous if you want to
return to the previous screen. Click Ext if you want to
exit the Setup Wizard.
Select the Destination