Setup > Upnp; Upnp - Cisco Linksys RVL200 User Manual

Chapter 4
Some Internet applications or games use alternate ports
to communicate between the server and LAN host. When
you want to use these applications, enter the triggering
(outgoing) port and alternate incoming port in the
Port Triggering table. Then the Router will forward the
incoming packets to the LAN host.
Applcaton Name Enter the name of the application.
Trgger Port Range Enter the starting and ending port
numbers of the trigger port range.
Incomng Port Range
Enter the starting and ending port
numbers of the incoming port range.
Click Add to Lst, and configure as many entries as you
would like, up to a maximum of 30. To delete an entry,
select it and click Delete selected applcaton.
Click Show Tables to see the details of your entries. The
Port Range Forwarding Table List appears.
Port Range Forwarding Table List
Port Range Forwardng
Select this option to view the
Port Range Forwarding entries.
Port Trggerng
Select this option to view the Port
Triggering entries.
Click Refresh to update the on-screen information. Click
Close to exit this screen and return to the Forwarding
screen.
On the Forwarding screen, click Save Settngs to save your
changes, or click Cancel Changes to undo them.
Setup > UPnP
Universal Plug and Play (UPnP) can be used to set up public
services on your network. When the UPnP function is
enabled, Windows XP can modify these entries via UPnP.
Setup > UPnP
4-Port SSL/IPSec VPN Router
Advanced Configuration

UPnP

UPnP Functon Select Yes to enable the UPnP function.
Otherwise, keep the default, No.
Servce Select the Service you want.
If the Service you need is not listed in the menu, click
Servce Management to add the new service. The Service
Management screen appears.
Service Management
Servce Name
Enter a name.
Protocol
Select the protocol it uses.
External Port
Enter the external port number.
Internal Port
Enter the internal port number.
Click Add to Lst. Click Save Settngs to save your changes,
or click Cancel Changes to undo them. Click Ext to return
to the UPnP screen.
If you want to modify a service you have created, select it
and click Update ths servce. Make changes. Click Save
Settngs to save your changes, or click Cancel Changes
to undo them. Click Ext to return to the UPnP screen.
If you want to delete a service you have created, select it
and click Delete selected servce. Click Save Settngs
to save your changes, or click Cancel Changes to undo
them. Click Ext to return to the UPnP screen.
Name or IP Address
Enter the name or IP address of the
server that you want the Internet users to access.
Enable Select Enable to enable this UPnP entry.
Click Add to Lst, and configure as many entries as you
would like, up to a maximum of 30. To delete an entry,
select it and click Delete selected applcaton.
Click Show Tables to see the details of your entries. The
UPnP Forwarding Table List appears.