Appendix O: Firmware Upgrade; Overview; Before You Begin; Internet Explorer 6.0 Or Higher - Cisco Linksys RVL200 User Manual

Appendx O
Appendx O:
Frmware Upgrade

Overview

This appendix explains how to upgrade the firmware of
the Router.

Before You Begin

If you are using Internet Explorer on Windows XP, disable
the pop-up blocking function before you upgrade the
Router's firmware. (This avoids a firmware upgrade
failure.)
NOTE:
Internet Explorer on Windows 2000 and
other operating systems do not have this issue.

Internet Explorer 6.0 or Higher

Open Internet Explorer.
1.
Click Tools.
2.
Click Internet Optons.
3.
Internet Explorer > Tools
Click the Prvacy tab.
4.
Internet Explorer > Tools > Tools
4-Port SSL/IPSec VPN Router
Deselect (remove the checkmark from) Block
5.
pop-ups.
Internet Explorer > Tools > Internet Options > Privacy
6. Click OK.

How to Access the Web-Based Utility

1. For local access of the Router's web-based utility,
launch your web browser, and enter the Router's
default IP address, 9.8.., in the Address field.
Press the Enter key.
Address Bar
2. A login screen prompts you for your User Name and
Password. Enter admn in the User Name field, and
enter admn in the Password field. (You can change
the Password on the Setup > Password screen.) Then
click Logn.
Login Screen
Firmware Upgrade
99