Plumbing Connections - Champion DH-1000 Installation Manual

1000 Series LT - Installation Guide
Installation Guide

Water Connection (1000 Series LT)
Water supply:
Plumbing installer must connect a 3/4" NPT hot water supply line to the dishwasher.
A 3/4" pressure regulating valve (PRV) (not supplied) must be installed in the water
supply line and adjusted to 20 ± 5 psi/138 ± 35 kPa flow pressure. Installation of a
Under NO circumstances, may the installing plumber connect a water supply line to the
(3/4" NPT line strainer not supplied)
30
3/4" NPT hot water supply (140°F/60°C minimum)
20 ± 5 psi/138 ± 35kPa flow pressure. Installation of 0-60 psi/0-414 kPa
pressure gauge is recommended.
0-60 psi/0-414 kPa pressure gauge is recommended.
dishwasher that is less than 3/4" NPT in size.
Note:
Note: