VLAN Configuration
You can configure VLAN in VLAN Configuration. There are four functions in VLAN
Configuration mode: VLAN Configuration, Create a VLAN Group, Edit/Delete
VLAN Group and Group Sorted Node. Follow the below description to configure
VLAN.
VLAN Configure
Before starting to configure VLAN, you must select the VLAN mode in VLAN
Configure function. Otherwise, user cannot create any new VLAN.
1. Select the <Edit>.
2. Select the VLAN mode by using "Space" key. There are two VLAN modes:
PortBase mode and 802.1Q mode.
802.1Q VLAN mode: configuration VLAN ID, Ingress Filter, and
Acceptable Frame Type.
VLAN ID (Port VID: 1~255): Type the PVID.
Ingress Filter: It matches that Ingress Filtering Rule 1 on web. Only
VLAN Configuration Main interface
29