Table of Contents
Advertisement
3. Network Application
3. Network Application
This section provides you a few samples of network topology in which the Switch
This section provides you a few samples of network topology in which the Switch
is used. In general, the TEG-S2620is is designed as a segment switch. That is,
is used. In general, the TEG-S2620is is designed as a segment switch. That is,
with its large address table (8k MAC address) and high performance, it is ideal for
with its large address table (8k MAC address) and high performance, it is ideal for
interconnecting networking segments.
interconnecting networking segments.
PC, workstations, and servers can communicate each other by directly
PC, workstations, and servers can communicate each other by directly
connecting with TEG-S2620is. The switch automatically learns nodes address,
connecting with TEG-S2620is. The switch automatically learns nodes address,
which are subsequently used to filter and forward all traffic based on the
which are subsequently used to filter and forward all traffic based on the
destination address.
destination address.
By using Uplink port, the Switch can connect with another switch or hub to
By using Uplink port, the Switch can connect with another switch or hub to
interconnect other small-switched workgroups to form a larger switched network.
interconnect other small-switched workgroups to form a larger switched network.
Meanwhile, you can also use fiber ports to connect switches. The distance
Meanwhile, you can also use fiber ports to connect switches. The distance
between two switches via fiber cable can be up to 550 m (multi-mode fiber) or 10
between two switches via fiber cable can be up to 550 m (multi-mode fiber) or 10
kilometer (single-mode fiber).
kilometer (single-mode fiber).
Small Workgroup
The TEG-S2620is can be used as a standalone switch to which personal
computers, server, printer server, are directly connect to form small workgroup.
11
Advertisement
Table of Contents
