English
Linking your car kit and phone
The interface module
Please refer to figure 4 on page 2.
The interface module enables you to set up and use the Bluetooth Hands Free Car Kit.
(1) Multifunction button
(2) Voice dial button
(3) Microphone mute button
(4) Volume control buttons
Linking your car kit and phone
Before you can use this car kit, you must link it with your phone.
You establish a Bluetooth link between your car kit and phone with a paired link.
When you set up a paired link, the car kit remembers the phone's ID. Once the car kit
and phone are paired, your car kit automatically connects to your phone every time
you start your vehicle or power up the car kit.
Initial pairing
With the car kit and phone in close proximity:
1. If the car kit's multifunction button is flashing: Press and hold it until it stops
flashing.
2. Press and hold the multifunction button until a flash alternates between the
multifunction button and the voice dial button.
3. Perform a discovery device from the phone. For details on device discovery for
your phone, refer to the phone's user's guide.
4. Select Motorola HF850 from the list of discovered devices
5. Enter the passkey 0000 when prompted, and confirm
8