Using Your Car Kit; Linking Your Car Kit; Device - Motorola SGSW-2620 User Manual

using your car kit

The User Interface Module (UIM) enables you to set
up and use your T603 Bluetooth Handsfree Car Kit.
The UIM provides both buttons to perform operations,
and an indicator light for status as shown below.
Multi-function (MFB)
button
red (END)
button
green (SEND)
button
indicator light
initial pairing
Important: The process of initiating a Bluetooth
connection with a device varies by device
manufacturer. Please have your device's user manual
available for reference if needed.
STEP ONE—turn on your device's Bluetooth
feature
Your device's Bluetooth feature is off by default. To use
your car kit, you must first turn on the Bluetooth
feature in your device.
For most Motorola phones, do the following:
a Press Menu > Settings > Connection > Bluetooth Link
> Setup.
b Scroll to Power.
c Select Change.
d Scroll to On.
using your car kit
12
linking your car kit and
Bluetooth-enabled

device

Before you can use your Bluetooth car kit, you must
first link it with your Bluetooth-enabled device. You
blue (UP ARROW)
button
establish a Bluetooth link between your car kit and
your device by creating a paired link.
blue (DOWN ARROW)
When you set up a paired link, the car kit remembers
button
your device and automatically connects to your device
every time you start your vehicle or power up the car
kit. The car kit can remember up to 6 devices.
Note: For safety reasons, it is recommended that the
pairing process be performed in a stationary vehicle.
e Press Select to turn on the Bluetooth feature.
Note: These steps are for most Motorola phones.
For other devices, see your device's user manual.
STEP TWO—connecting to your car kit
Before using your car kit, you must first pair (link) it to
your device. With the car kit and device turned on and
in proximity:
1 ENSURE THAT THE CAR KIT IS IN PAIRING
MODE. Press and hold Multifunction (MFB)
button for 2-6 seconds until it beeps and the
indicator begins flashing in blue. The car kit is
now in the pairing mode.
2 SET YOUR DEVICE TO LOOK FOR YOUR CAR KIT.
Perform a Bluetooth device discovery/search from
your device. For most Motorola phones, do the
following:
using your car kit
The Bluetooth feature remains on until you
turn the feature off.
11