Using The Self-Timer - Canon Powershot G10 IS User Manual

Using the Self-Timer

You can set the time delay and the number of shots you wish to take in
advance.
Shoots 10 seconds after you press the shutter button.
• 2 seconds before the shutter releases, the self-timer lamp
10 sec.
Self-Timer
and sound speed up.
Shoots 2 seconds after you press the shutter button.
• When you press the shutter button, the self-timer sound
2 sec.
beeps quickly, the lamp blinks, and the shutter releases
Self-Timer
2 seconds later.
You can change the delay time (0 – 10, 15, 20, 30 sec.) and
number of shots (1 – 10).
• When a delay time of over 2 seconds is set for the [Delay]
Custom
option, the self-timer sound beeps quickly 2 seconds before
Timer
the shutter releases. If multiple shots have been specified for
the [Shots] option, the sound will play for the first shot only.
When you press the shutter button, the camera shoots 2
seconds after a new face is detected within the composition.
You can change the number of shots (1 – 10).
Face
• The self-timer sound beeps rapidly and the lamp blinks when
Self-Timer
a new face is detected, and the shutter releases 2 seconds
later.
, ,
1
Select [Drive Settings].
1. Press the MENU button.
2. In the
button to select [Drive Settings].
3. Press the
Available Shooting Modes
menu, use the
button.
or
75
p. 300