Configuring The Camera; Power Saving Function - Canon Powershot G10 IS User Manual

216

Configuring the Camera

Power Saving Function

This camera is equipped with a power saving function, which can
automatically turn off the power or LCD monitor.
Auto Power Down When set to [On], the power will shut off in the
Display Off
1
Select [Power Saving].
1. Press the MENU button.
2. Use the
menu.
3. Use the
[Power Saving].
4. Press the
2
Make settings.
1. Use the
option.
2. Use the
settings.
3. Press the MENU button.
following circumstances. Press the power button again
to restore power.
Shooting mode: Approximately 3 minutes after the last
control is accessed on the camera.
Playback mode or when connected to a printer:
Approximately 5 minutes after the last control is
accessed on the camera.
In shooting mode, the LCD monitor automatically turns
off after the selected time if no control is accessed,
regardless of the [Auto Power Down] setting. Press
any button other than the power button or change the
camera orientation to turn the LCD monitor back on.
or button to select the
or button to select
button.
or button to select an
or button to make