Using Self·timer - Canon FTb Instructions Manual

Using Self· Timer
1
Wind the film advance lever.
2
Turn the self·timer lever counterclockwise all the way
down until it stops.
3
Depress the shutter release button . The shutter will be
actuated approximately 10 seconds later.
• Be sure to wind the film advance lever. Otherwise, the
self·timer will act but the shutter will not be actuated.
• The self·timer lever can be used as a stopped·down
functioning lever as soon as the self·timer is charged.
• If the self·timer lever is set while the m irror is in an
upward position , the mirror'up position is released. There·
fore, always set the mirror in an upward position after set·
ting the self·timer.
41