Canon Powershot G10 IS User Manual page 243

Shooting movies
The recording time may not display properly or
shooting may stop unexpectedly.
The following types of
memory cards are used.
- Slow recording cards.
- Cards formatted on a
different camera or a
computer.
- Cards which have had
images recorded and
erased repeatedly.
"!" displayed on the LCD monitor in red and
shooting automatically stopped.
There is insufficient free
space in the camera's
built-in memory.
Zoom does not operate.
Zoom lever was pressed
while shooting in movie
mode.
Playback
Cannot play back.
You attempted to play
back images shot with
another camera or images
edited with a computer.
Although the recording time may not
display properly during shooting, the
movie will be recorded correctly on
the memory card. Recording time will
display properly if you format the
memory card in this camera
(excluding slow recording memory
cards) (pp. 16, 220).
Try the following procedures.
- Format the card with a low level
format before filming (p. 220).
- Lower the recording pixels (p. 107).
Operate the zoom before shooting in
movie mode (p. 69). Note the digital
zoom is available while shooting (only
in Standard movie mode).
Computer images that cannot be
played back may play back if they are
added to the camera using the
supplied software program
ZoomBrowser EX or ImageBrowser.
See ZoomBrowser EX/ImageBrowser
Software User Guide (PDF).
241